home *** CD-ROM | disk | FTP | other *** search
/ NetNews Offline 2 / NetNews Offline Volume 2.iso / news / comp / sys / amiga / hardware-part1 / 4840 < prev    next >
Encoding:
Internet Message Format  |  1996-08-05  |  927 b 

  1. Path: usenet.ucs.indiana.edu!ezinfo!dfetter
  2. From: dfetter@ezinfo.ucs.indiana.edu (Daniel Fredrick Etter)
  3. Newsgroups: comp.sys.amiga.hardware
  4. Subject: Is this a heat problem?
  5. Date: 23 Feb 1996 16:24:44 GMT
  6. Organization: Indiana University, Bloomington
  7. Message-ID: <4gkpoc$9tf@usenet.ucs.indiana.edu>
  8. NNTP-Posting-Host: ezinfo.ucs.indiana.edu
  9. NNTP-Posting-User: dfetter
  10. X-Newsreader: TIN [version 1.2 PL2]
  11.  
  12.  
  13. Whenever I engage the 040 board in my 3000, within 10 or 15 minutes I
  14. will get an error when running a program, usually while running a
  15. graphics intensive program. The error I get is #8000 0004.
  16.  
  17. Like the title says, is this a heat problem? 
  18.  
  19. The 040 is a Mercury with 32M. The 3000 has a Toaster, VLab Y/C, and a
  20. PAR. The problem didn't get bad until I installed the PAR. The PAR drive
  21. gets very warm, and the PAR itself won't even work in 040 mode, the PAR
  22. software crashes every time, but it works in 030 mode.
  23.  
  24.  
  25. Dan
  26.  
  27.